n the eyes of most users, cleaning windows is no different than cleaning solar panels. You might think, they have just as smooth and flat a surface, and I can clean them the same way.

In fact, there is a clear difference between the two at first glance—their angles to the ground are different. In the vast majority of cases, the glass on the windows is perpendicular to the ground. This means that when you rinse the dirt off the glass with water, the residual water will flow away quickly due to the action of gravity. In order to consider the efficiency of absorbing sunlight when installing solar panels, the tilt angle is usually between 20 degrees and 45 degrees (depending on the local latitude). A smaller angle of inclination will slow down the flow of water, and if there is dirt mixed in the water, it may remain on the panel.

The above is just one of the differences. In fact, compared to the glass in the window, the solar panel array is much larger and is often installed in high places or other difficult to reach places. Cleaning large solar panels using traditional brush and water combinations is inefficient and potentially dangerous. First of all, human power is limited, and it is difficult to use a lot of strength to remove the dirt on the surface of the solar panel for a long time. That is to say, as the cleaning process progresses, the further the cleaning effect is, the less satisfactory it will be. What's more, the surface of the panel is sloped and slippery, and if a person stands on it to clean it, it is easy to slip and get hurt.

And now, with a well-designed solar panel cleaning brush, everything will become easier. This Model X4 double-head electric brush from Zhenda Brush Industry is the perfect solution for cleaning solar panels.

In terms of power, the product is driven by a motor to save human energy. The motor has a power of 120W and can provide a speed of 300RPM. If you have higher needs, there is also the option of an upgraded brushless motor, which results in 150W of power and speeds up to 350RPM. The upgraded version of the brushless motor will also bring you more other advantages, such as longer service life, better waterproof and dustproof, etc., bringing great convenience to your cleaning work. In addition, we also designed the rotation direction of the two brush discs to be opposite, so that it is easier for users to maintain balance when using the product, which is very user-friendly.

Not to mention the various practical accessories. Including water hoses with customizable lengths, retractable extension poles, and lithium battery version battery.

The function of the water pipe is to directly supply water to the brush head, so as to effectively remove stubborn stains on the panel. The water spray hole of this solar panel professional cleaning equipment is located in the middle of the brush plate, and the high-speed rotating brush plate driven by the motor can achieve perfect results.

The special telescopic extension pole is very necessary for cleaning panels located in high places or other hard-to-reach areas. The maximum extension length of the three default specifications of the extension pole is 3.5M/5.5M/7.5M. The material is aluminum alloy or carbon fiber, which is light in weight and easy to use, not easy to break.

In order to meet the needs of cleaning while moving, the lithium battery version and dual power supply version of this electric solar panel cleaning brush can be powered by a matching lithium battery pack. The standard voltage of the battery is 24V, and the capacity is 26Ah, which can satisfy the work for a long time.

Of course, the two brush plates are also very important, and the requirements for the manufacturing process are very high. When designing the brush part, we fully considered the cleaning area, weight, material, etc., and even the angle of inclination of the brush filament! That's why this product is so satisfying - the high-quality nylon brush filaments are inflexible and long-lasting; the weight of the entire device can be evenly distributed on the contact surface between the brush head and the panel without damaging or scratching the panel;It is made of professional hair planting technology, the brush wire is not easy to fall off, the density is high and the cleaning power is strong. All in all, whether your customers are individuals or professional large-scale solar power plants, this device can meet their needs.

If you are interested in the Solar Panel Cleaning Brush Model X4, you can contact our business manager at any time. You can learn more about the specific parameters, the minimum order quantity and quotation, etc. We hope to become a partner with you!