With the progress of time, the proportion of manual cleaning in urban road cleaning processes is decreasing. The use of road sweepers has allowed more and more sanitation workers to be freed from the busy and inefficient work of sweeping roads. Road cleaning work is worth long-term and stable investment. Compared with the negative impact on traffic and the cost of large-scale repairs after road damage, the cost of maintaining roads with sweepers is lower. The wise choice is to start a maintenance plan immediately after the road is put into use to determine how often the road should be cleaned.

Professional road cleaning equipment is designed to handle debris on the road surface, including dust, tree branches, and gravel. By cleaning up various debris in a timely manner, the service life of the road can be effectively extended, and the time for road damage to occur can be postponed as much as possible. In a sense, this is an effective way to save the budget.

However, after long-term use, some sections of the road will still inevitably suffer damage. The municipal department needs to repair and rebuild these roads in a timely manner to restore normal traffic order and avoid the potential for traffic accidents. In the process of road repair and reconstruction, road sweepers also play an important role.

Under the flat asphalt layer is a gravel layer, and these gravels will be exposed after the asphalt layer is damaged. It is necessary to clean up these gravels during the repair or reconstruction process, which puts higher demands on the Poly Wafer Brushes installed on the sweeper. It should be noted that the size of these gravels varies, and the width of larger gravels may reach several tens of millimeters. Only with sufficient force can these gravels be pushed out of the pit and then the road surface can be re-leveled.

Our Turkish customer wanted to use the Poly Wafers produced by Zhenda Brush in this scenario and expressed the need for special manufacturing processes to ensure that the bristles would not fall off or break during the brushing process. For this purpose, the customer visited our factory and discussed the technical details of brush production with our production and research personnel. 

After a long period of discussion and research, and with reference to the professional opinions of technical personnel from all parties, our company finally determined the specific production process and made samples for the customer to test. After the customer approved the hardness and toughness of the bristles, we started mass production. The customer has now received the product and started to use it.

Zhenda Brush, located in Yuantan, Anhui, the capital of China's brush industry, has produced various Wafer Brushes that meet the customization needs of different customers for many years and has received widespread praise. In the future, we will pay more attention to the global market and strive to provide satisfactory products for customers in various countries and regions around the world.

Business Email: marketing@zhendabrush.com